Scientific studies confirm that the temperature in closed environments can have a significant impact on the productivity, and that the “comfort zone” is located between 22°C and 25°C. The chart below, based on research from the Helsinki University of Technology’s ‘Effects of Temperature on Work Performance in Office Environments’, shows how the relative productivity changes with temperature.




"While fans are often used to cool people, they do not actually cool air (if anything, electric fans warm it slightly due to the warming of their motors), but work by evaporative cooling of sweat and increased heat conduction into the surrounding air due to the airflow from the fans. Thus, fans may become ineffective at cooling the body if the surrounding air is near body temperature and contains high humidity."

Installation of a COLDMIST system permits the atomization of water to micro droplets around 6-8 microns in size. These droplets are light in weight and are easily flash evaporated . Light droplets remain airborne for longer periods of time before succumbing to natural gravity forces and heading downwards. When these droplets come into contact with hot air they flash evaporate and in so doing effectively consume heat in the air. That heat is effectively removed from the air. Repeated millions of times a second, this flash evaporation process results in large amounts of heat energy consumption thus removing  heat from the air.

Coldmist Cooling is designed to operate where conventional air conditioning is not practical, possible or simply too expensive. As a derivative of the climate control systems used in livestock cooling applications such as chicken houses, piggeries and dairies, the design incorporates the injection of water under high pressure through specially designed and patented nozzles. The resultant finely atomized 5 micron water droplets, when introduced into the surrounding air effectively flash evaporate and cool the contacted air.

Generally, misting systems work best where lower humidity is present with efficiency decreasing as humidity increases. To overcome high humidity or to cater for situations where specific targeted areas need to be cooled, fitting misting rings to the front of electric fans is the solution. The advantage here is the added convective cooling ( wind chill factor ) that is created. Misting rings can be retro fitted to existing fans by attaching them to the front of the fan guard by simple use of cable ties or similar fixing methods.

Humidifier and Cooler compact unit

- No nozzles
- No clogging
- Recirculation system
- Only one motor
- Born for little and medium rooms
- Polipropilene made

Humidifier and cooler unit

- No nozzles
- No clogging
- Recirculation system
- Two motors
- Stainless steel housing

Humidifier and cooler unit

- No nozzles
- No clogging
- Recirculation system
- Two motors
- Stainless steel housing

LOADED WITH FEATURES ! :

* TRI-FILTER system: tank, mist line and nozzles.
* Integral high pressure pump 0.4LPM, 1015 psi, with Motor circuit breaker for electrical safety
* 40 liter water tank for 2 hours of continuous misting
* Can also be connected directly to mains water to ensure uninterrupted operation !
* 6-nozzle mistring matrix. Brass nozzles fitted with anti-drip adaptors so no wetting!
* Adjustable height up to 185cm
* 3-speed Oscillating fan with tilt-adjustable head
* This mobile system has programmable digital clock for preset start-up and run operation.
* Programmable for 8 individual cycles over a 24 hour period - can be used very effectively for programmed humidity control in greenhouses.
* Easily transportable over all terrain courtesy of 2 large pneumatic wheels with a heavy duty lockable front castor for safety
* Wheel locks incorporated for greater safety and stability
* Incorporates dry run pump protection in the event the water supply is cut plus motor overload protection
* Will propel a powerful jetstream of misty fog up to 4 meters away
* SUPER QUIET operation! ! Ideal for marquees, tents, outdoor entertainment areas, gazebos and more.

SUPPLIED READY-TO-GO!

1200mm Diameter Fan exchanging 35000 m³ of air per hour. Supplied with 2.5Lpm / 1000psi High Pressure Pump and 28 High Pressure Nozzles supplying phenomenal cooling power.

Ideal for indoor / outdoor worksites for relief of heat stress. Needs to be connected to mains ( or similar ) water supply.

This unit helps meet current OHS obligations which require that workers working in heat stress conditions are given pro rata rest and recovery periods. Improves worker comfort and productivity levels.

Aquafog atomizer humidifier systems produce a very fine cool mist fog used for spot & indoor outdoor area cooling cooler. Powerful humidifiers for adding moisture up to 100% RH for greenhouses, greenhouse cooling and propagation, concrete curing, mushrooms growing, wine and industrial warehouse storage system. Pest control chemical fumigation pesticide ULV fogging for many commercial and industrial applications. Aquafog 400 misting for outdoors events, zoos, patio, orchids, livestock and horses.

Mobile Fine-mist Humidifier

HRSM™ is compact, sturdy and enormously powerful. Uses include; large-scale humidification, fumigation, evaporative cooling and industrial spot cooling to name a few. The pivoting fogging head allows you to direct the fine-mist fogging output right where you need it. HRSM combines the TurboXE Fan with a portable condensation recirculation tank for high mobility and ease of use. Suitable for indoor/outdoor, units are fully adjustable with fogging capabilities up to 32 gallons per hour. HRSM's propel a powerful jet stream of misty-fog mixed air-flow up to 35 feet in distance. The 18 gallon reservoir tank with large mouth opening is ideal for adding liquid chemicals for fumigation and sterilization applications. An internal float valve assembly with garden hose connection allows for continuous duty applications.

Probe Industries’ revolutionary method for combating dust and odours – called the Rotary Atomiser – is making a major impact on some of industry’s most persistent environmental problems.

It is a remarkably effective way of controlling industrial odours and for controlling dust.

Penguin series atomizers give high volume, ultra-fine mists that disperse quickly. Incredible ease of installation and use, they have a simple single or 3-phase motor; there are no sophisticated controllers or electronics. Simply wire in the atomizer, plumb a water line, and they are ready to work. Operates on single-phase, or 3 phase 220/440V also available.

Choose a Penguin ™ electrically-powered atomiser when some to all of the following design conditions apply to you…