• Fixed installations or  portable applications
• size and weight of the atomizer is not critical
• Ambient environment under 100 degrees F (40 degrees C.)
• condensing humidity, dust and dirt are present.
• sprayed fluids are only mildly corrosive.
• electricity or electric fields are OK; explosion-proof rating not required.
• spray rates typically under 4 gallons (16 l ) per minute, with 2 GPM or less as ideal.
• no air assist, air assist under 1500 CFM, or air assist from an external source (such as an HVAC system) are specified.
• electric power is already on-site and available.

If few or none of these conditions apply to you, you may want to consider our Proptec™series hydraulic powered atomizers.

Features:

• USA made tropicalized motor- several choices available.
• Very fine (<50 micron) to medium droplet spectrum
• Atomizer is virtually clog-proof
• Radial spray pattern practically unaffected by wear
• Conical spray pattern with air-assist option
• a feature-rich variable speed drive, allowing them to reach up to 5000 RPM continuously, for the finest fogs and mists we have ever offered in an electric atomizer.
• ability to control both the motor and a pump circuit from the Variable Frequency Drive (VFD).
• ability to fine-tune droplet size by varying atomizer speed
• a stainless-steel motor for the ultimate in environmental resistance and non-contaminating design.
• design tested to meet our stringent product life and performance standards

Dimensions:

• Approximate body dimensions:
  • 5.0" x 7.0" x 9.5" (127mm x 178mm x 241mm)

Specifications:

• Chemical flow rates to 2 GPM (7.5 LPM) with higher flow rates available
• Fixed operating speed of 3450 RPM (2950 at 50 Hz)
• Droplet size from <50 – 1000 microns
• Spray pattern of 4' to 13' (1.20m to 3.05m) radius
• Power requirements of 110V 1 HP or 220V 1 HP electric power (60 hz), or 1 HP 220/440 3 Phase