A major breakthrough in keeping industrial odour under control is by “capturing” mal-odourous molecules and destroying them rather than simply masking them.

Designed to be heavily diluted in water and sprayed onto odour producing molecules in the air, the odour reducing chemical combines with the odouriferous particles to make them safe and odourless and then pulls them down to the ground. This is done using atomised water micro droplets as the carrier of the chemical. The minute droplets are lightweight and remain airborne for extended periods giving them a dramatically increased range compared to normally spayed drops. Atomising the water is possible by various means including high pressure pumps and nozzles, rotary atomiser units and centrifical water fracturing devices of varying designs.

Why it matters

Industrial odours are a major environmental problem. They can create an unpleasant working environment, which is obviously of concern to those who are required to work there. Of great concern also is the effect such odours may have on residents who live near industrial premises.

More importantly, long-term exposure to industrial odours is a kind of passive form of pollution. There is the prospect of long-term damage to health, with the environmental and legal issues which that would raise.

How the chemical works

It works by using special surfactant reagents which help the minute water droplets to take up the organic substances which produce smells -- something which does not normally happen. This is done by creating “clusters” of molecules inside the droplets which trap the odours which then fall to the ground with the water rather than returning to the air as gas.

How it helps

Spraying a continuous aerosol of chemical is an effective and low-cost method of odour control, even in difficult situations such as industrial premises and sewerage works. Correctly applied the chemical can create solution where  the smell is entirely eradicated by the time it reaches the outer limits of the area sprayed.

In order to work, the chemical must be applied using an accurate and precise spraying system which produces microscopic droplets of a consistent size. Ultrasonic, air assisted and misting nozzles can be used, but the preferred method is to use a  Rotary Atomiser system.

COLDMIST Cooling Australia supplies a large range of delivery systems to effectively deliver your chemicals.

Misting rings can be retro fitted to existing fans by attaching them to the front of the fan guard by simple use of cable ties or similar fixing methods.

Aquafog atomizer humidifier systems produce a very fine cool mist fog used for spot & indoor outdoor area cooling cooler. Powerful humidifiers for adding moisture up to 100% RH for greenhouses, greenhouse cooling and propagation, concrete curing, mushrooms growing, wine and industrial warehouse storage system. Pest control chemical fumigation pesticide ULV fogging for many commercial and industrial applications. Aquafog 400 misting for outdoors events, zoos, patio, orchids, livestock and horses.

Fogmaster^® Drum Mounted ULV fogger for large areas

The Anotec Fogmaster DM7421 drum mounted unit features precision control of particle size, from a dry, 7-micron ULV (ultra low volume) droplet to the larger particles of conventional fogging and misting equipment.

ULV application provides greater penetration and diffusion of fog particles, allowing more concentrated solutions to be used and shortening application times. Also, the higher surface to volume ratio of small droplets makes them superior for odour control and other gas contact applications.

With precision control and variable output (0-300mls / min), the Anotec Fogmaster DM 7421 can handle both oil or water-based solutions. It is easily calibrated in the field to accommodate differences in solution viscosity and density. Application sites include waste treatment plants, paper mills, parks, warehouses, and food storage centres.

The Anotec Fogmaster  DM7421 -- technologically advanced fogging, with controlled flow and particle size.

Probe Industries’ revolutionary method for combating dust and odours – called the Rotary Atomiser – is making a major impact on some of industry’s most persistent environmental problems.

It is a remarkably effective way of controlling industrial odours and for controlling dust.

The Big Daddy of them all. The COLDMIST DUSTKILLER™ is the biggest unit in our range. This unit can cover up to 1,950 square meters. Fitted with 40°  oscillation facility for large area coverage. The fine mist created by the unit captures airborne dust particles and drives them to the ground, helping you adhere to the toughest air quality standards.

Industrial, Municipal Odour Control and related applications

Ultra-fine atomization and powerful circulation for complete dispersion of liquid chemicals. Mobile ORSM™ floor units feature a pivoting fogging head, allowing you to easily direct the product right where you need it. Units have enormous capability to atomize liquid additives into a vapor mix with very powerful air-flow. Odor neutralizing chemicals or other liquid additives that need to be fumigated for large indoor/outdoor applications is the job for ORSM™.