| If your application calls for up to 12 gallons per minute (48 lpm) per application point, rotary atomizers may be your answer. For higher flows, arrays of atomizers can easily be constructed. Offered with or without air-assist to suit your application. |
|
Some benefits of rotary atomizers for high-volume applications:
|
-
Vary flow to match your process- spray pattern remains uniform.
-
low energy cost per gallon of sprayed material
-
run-dry capability: no damage if flow stops.
-
clog and wear resistant: working parts will last thousands of hours, can be cleaned and re-used.
-
Excellent mixing and dispersion with surrounding air.
-
Sanitary- no reservoirs, catchments, or other places where liquids can accumulate and grow bacteria and molds.
|
Example 1:
air-assisted fine droplet spraying
Model as shown: PT100-35A-T2G-0200-A
Approximately 6 GPM spray rate.
Droplet size: fine to very fine |
|
|
|
Example 2:
Coarse droplet spraying, approximately 4 GPM single stage atomizer
Model as shown: PT099-35-T4-0000-A
Maximum spray RADIUS at 5000 RPM: 13’
Droplet size: Coarse
Picture field of view: approximately 12”
|
|
 |
Example 3:
Coarse droplet spraying, approximately 8 GPM single stage atomizer
Model as shown: PT099-60-T4-0000-A
Maximum spray RADIUS at 5000 RPM: 13’
Droplet size: Coarse
Picture field of view: approximately 14” |
|
|
|
Example 4:
4 GPM, dual stage atomizer showing 12” fine-mesh basket
Model as shown: PT099-35-T2G-2230-A
Maximum spray RADIUS at 5000 RPM: Not applicable- fine droplets remain suspended indefinitely, travel with air.
Picture field of view: approximately 30”
|
|
 |
|
